Garage Door Safety Inspection

A safety inspection works through the door and opener as a system and records the condition of every part whose failure could hurt someone or drop the door. It starts with the door disconnected from the opener and moved by hand. The balance test stops the door at several heights: a properly balanced door stays where it is left, while one that slams down or shoots up is being carried by springs that are wrong for its weight or are failing. Springs are examined for gaps between coils, rust, and stretching, cables for broken strands and rust at the bottom brackets, and extension-spring doors are checked for safety cables running through the springs, the cables that keep a breaking spring from flying across the garage. Rollers, hinges, and tracks are checked for wear, cracks, loose fasteners, and brackets pulling from the framing. The opener's protective systems get the closest attention. The photo-eye sensors are confirmed to sit at the correct height, aligned and clear, and the door must reverse when the beam is broken during closing. The contact-reversal test places a block flat on the floor in the door's path, and the closing door must reverse within moments of touching it. The manual release is pulled to confirm the door can be opened by hand during a power cut, and that it re-engages afterward. Panels are checked for cracks and rot that weaken them, the bottom seal for gaps that let the door strike unevenly, and pinch points between sections are noted on doors that lack pinch-resistant joints. Findings are reported in plain categories: working, worn and worth watching, and failed or unsafe, with the failed items explained in terms of what they risk, so the household can decide what to correct now and what to plan for. The visit also confirms that the release handle hangs within reach of an adult standing on the floor, and that the door's safety labels are present and still legible.

Free EstimateCall (888) 248-0203